Difference between revisions of "VPN Instructions for Android"
m (→‎Using the Clientless SSL VPN Option on Android)
 
(3 intermediate revisions by one other user not shown)
Line 30: Line 30:
 
==Using the SSL VPN Option on Android==
 
==Using the SSL VPN Option on Android==
 
===Setup the CAEDM SSL VPN on Android===
 
===Setup the CAEDM SSL VPN on Android===
−
#Using your web browser, go to https://vpn.et.byu.edu
+
#Using your web browser, go to https://play.google.com/store/apps/details?id=com.fortinet.forticlient_vpn&hl=en
−
#*''NOTE'': If you get an orange login screen, then you have entered the wrong address and you will not be able to login. Try again with the exact address listed above.
+
#Tap on "Install" and wait for the app to download
−
#In the blue Please login box, enter your username and password
+
#Tap "Open" to configure the VPN
−
#Click Login
+
#In the box labeled "VPN Name:" type <code>CAEDM SSL VPN</code>
−
#In the FortiClient Download box, click FortiClient for Android
+
#Under "VPN Type:", tap on "SSL VPN"
−
#*''NOTE'': You can alternatively download the FortiClient for Mac from https://www.forticlient.com.
+
#tap the "create" button. If it is covered by your keyboard then hit the <- soft back button on the lower right hand side of your device first.
−
#Follow the on-screen instructions
+
#under "SSL VPN settings" there exist many options, tap "Server" and write "vpn.byu.edu"
−
#Configure the VPN connection using the fact given in the [[VPN#Quick Installation Facts (for the impatient)|Quick Installation Facts (for the impatient) section.
+
#Tap on "Username" and enter your caedm username
 +
#Tap on "Password" and enter your caedm password (This is not a recommended security practice)
 +
#Tap on "Always Up" and then "Enabled"
 +
#Tap on "Auto Connect" and then "Enabled"
 +
#Hit the soft <- back button on the lower right hand side of your screen
 +
#Tap the green "Connect" button
 +
#login with your credentials
  
 
==Using the Clientless SSL VPN Option on Android==
 
==Using the Clientless SSL VPN Option on Android==
−
Go to https://vpn.et.byu.edu with you browser of choice.
+
#Go to https://vpn.et.byu.edu/ using your browser of choice.
 +
#Enter your CAEDM username and password, and then click "Login"
 +
 
 +
Note: If all you see is a white screen, it could be because you need to pinch the screen to zoom out. You can also try panning towards the center of the page where the login box is located.

Latest revision as of 10:15, 11 January 2016

All three VPN types are supported on Android 4.0 or higher. The following instructions will help you create and use the VPN option of your choice. For more information on the VPN types, see VPN.

Using the IKEv2 Option on Android (preferred)

Setup the CAEDM IKEv2 VPN on Android

  1. Open the Google Play app.
  2. Search for "strongSwan"
  3. Select "strongSwan VPN Client", and select "Install"
  4. Open the newly installed strongSwan app
  5. Select "ADD VPN PROFILE"
  6. Enter the following information:
    1. Profile Name: CAEDM IKEv2 VPN
    2. Gateway: vpn.et.byu.edu
    3. Type: (Select "IKEv2 EAP (Username/Password")
    4. Username: (enter your CAEDM username)
    5. Password: (enter your CAEDM password)
    6. CA certificate: (check mark "Select automatically")
  7. Select "SAVE"

Connecting to the CAEDM IKEv2 VPN on Android:

  1. Open the strongSwan app
  2. Select the CAEDM IKEv2 VPN connection
    • NOTE: You may be prompted to allow strongSwan to intercept network traffic. To continue, select "I trust this application" and select "OK"

You are now connected to the CAEDM IKEv2 VPN.

Disconnecting from the CAEDM IKEv2 VPN on Android:

  1. Open the strongSwan app
  2. Select "Disconnect"

You are now disconnected from the CAEDM IKEv2 VPN.

Using the SSL VPN Option on Android

Setup the CAEDM SSL VPN on Android

  1. Using your web browser, go to https://play.google.com/store/apps/details?id=com.fortinet.forticlient_vpn&hl=en
  2. Tap on "Install" and wait for the app to download
  3. Tap "Open" to configure the VPN
  4. In the box labeled "VPN Name:" type CAEDM SSL VPN
  5. Under "VPN Type:", tap on "SSL VPN"
  6. tap the "create" button. If it is covered by your keyboard then hit the <- soft back button on the lower right hand side of your device first.
  7. under "SSL VPN settings" there exist many options, tap "Server" and write "vpn.byu.edu"
  8. Tap on "Username" and enter your caedm username
  9. Tap on "Password" and enter your caedm password (This is not a recommended security practice)
  10. Tap on "Always Up" and then "Enabled"
  11. Tap on "Auto Connect" and then "Enabled"
  12. Hit the soft <- back button on the lower right hand side of your screen
  13. Tap the green "Connect" button
  14. login with your credentials

Using the Clientless SSL VPN Option on Android

  1. Go to https://vpn.et.byu.edu/ using your browser of choice.
  2. Enter your CAEDM username and password, and then click "Login"

Note: If all you see is a white screen, it could be because you need to pinch the screen to zoom out. You can also try panning towards the center of the page where the login box is located.

Retrieved from "https://caedm.et.byu.edu/wiki/index.php?title=VPN_Instructions_for_Android&oldid=6237"